Includes Twelve 32 oz. Bottles per Case.
An extra strength clinging bowl, tile, and porcelain cleaner and deodorizer designed to remove heavy build-up of water scale, soap scum, urinary salts, and rust from hard surfaces. Can be used to clean and deodorize wash basins, bath tubs, shower stalls, drinking fountains, toilet bowls, urinals, and sinks. Its clinging formula controls run-off for effective usage. This product contains no harmful hydrochloric or sulfuric acids.
TOILET BOWLS: Remove water by forcing it over the trap with the swab mop. Saturate swab with the cleaner and wet all surfaces thoroughly. It is most important to swab under the rim of the bowl to clean water outlets. Allow cleaner to remain for at least 10 minutes until all rust, scale, and stains are loosened. Rinse by flushing.
URINALS: Place clean mop over trap in urinal and saturate with bowl cleaner. Swab urinal thoroughly. Remove screen at urinal trap and pour approximately 6 to 8 ounces of concentrate into and around drain opening. Allow to soak a few minutes. Replace screen and flush well.
TILE, WASHSTANDS, SHOWERS, FIBERGLASS, and STAINLESS STEEL: Always dilute product by adding 1 quart of product per gallon of water. Using a swab mop, sponge, brush or cloth; apply to wet all surfaces thoroughly. Rinse thoroughly with clean water after several minutes. Do not use on any surface, such as marble, that can be damaged by acidic materials. Many surfaces are not resistant to acid.
|Color ||Bright Pink |
|Odor ||Cherry |
|pH ||1.0-1.5 |
|Recommended Dilution ||RTU |
|Base ||Phosphoric Acid |
|Acid Content ||22% |
|Viscosity ||Thick |
|Foam ||Moderate |
|Rinsability ||Excellent |
|Flashpoint ||None (waterbased) |
|Storage/Stability ||2 years |
|Weight per gallon ||9.37 lbs/gal |
|Freeze/Thaw Stability ||Keep from freezing |