-
Chemicals
-
Supplies
-
Equipment
-
Parts & Accessories
- HOME
-
CHEMICALS
CHEMICALS
-
SUPPLIES
SUPPLIESCLEANING HAND TOOLSMATERIAL HANDLING EQUIPMENTPACKAGING & SHIPPINGPAPER PRODUCTSRAGS, WIPES, TOWELSRESTROOM SUPPLIESSAFETY PRODUCTSWASTE MANAGEMENT
-
EQUIPMENT
EQUIPMENT
-
PARTS & ACCESSORIES
PARTS & ACCESSORIESACCESSORIESBATTERIES & CHARGERSBRUSHES, BROOMS, PADSCHASSIS COMPONENTSENGINE PARTSFILTERSMOTORS & PUMPSSEWER & EXCAVATION TOOLS
![](images/pixel_trans.gif)
Bortek Permacote Plus Floor Finish
About this item
A new generation floor finish formulated with a patented polymer technology that is designed to work with any type of maintenance program and any equipment on all types of floors due to its ultra-compatibility and flexibility. This high-solids finish requires fewer coats and provides superior gloss, excellent durability and superior leveling. New chemistry allows the finish to form good film even in poor drying conditions. Excellent response with any type of UHS equipment – propane, battery, or cord electric. Easy to apply and ideal for weekly burnishing.
DIRECTIONS
PREPARATION: If stripping is necessary, use a high quality stripper and follow the directions accordingly. Follow with a thorough rinsing and allow floor to dry completely. If stripping is not necessary; sweep up loose dirt and dust. Clean with a quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow floor to dry completely.
FINISHING: Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 30 minutes before applying the next coat. Four coats are ideal initially, depending on the condition of the floor and desired gloss.
MAINTENANCE: The floor may be maintained using a quality floor cleaner and damp mopping regularly. Spray buffing or mop-on restoring may also be done after sweeping up loose dirt and dust. Follow directions for each product accordingly.
This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by state and Federal regulations.
Specifications:
Color | White |
Odor | Fragrance free |
pH | 8.0 – 9.0 |
Non-Volatile Solids | 25% |
Coverage | 1800 – 2200 ft2 / gal. |
Recommended Coats | 4 |
Dry / Recoat Time | 30 minutes min. |
Maintenance Schedule | Weekly burnish or spray buff |
Slip Resistance | 0.5 min. by ASTM-D2047 |
Storage/Stability | 1 year |
Weight per Gallon | 8.68 lbs./gal. |
Freeze/Thaw Stability | 3 cycles |